Vinyl cutter-adamfofa cutouts

By Support writer

Mfonini a ɛho tew a ɛda adi yɛ ade a mfaso wɔ so a wofi ase yɛ vinyl adwuma, nanso nea wɔde twa ade hia nsusuwii ahorow, na ɛnyɛ mfonini a ɛda adi pefee. Siesie mfonini a ɛyɛ den, yi nsupɔw nketenkete ne nsonsonoe teateaa fi hɔ, ma anoano a dede wɔ so no nyɛ mmerɛw, na sɔ sɛnea wɔayɛ no hwɛ wɔ ne kɛse ankasa mu. Afei hwehwɛ anaa san twetwe nsusuwii a wɔapene so no wɔ softwea a wɔde di dwuma ma wo cutter no mu.

Easy Background Remover betumi atew asɛmti no ho na wada ne nsusuwii adi. Ɛndan raster PNG nkɔ vector fael a wɔahyɛ ho bɔ sɛ ɛyɛ cutter-ready. Saa nsakrae no da so ara yɛ nhyehyɛe ne mfiri-hyehyɛ anammɔn a ɛyɛ soronko.

Susuw ho wɔ nneɛma asinasin mu

Wɔ screen so no, woda so ara tumi hu pixel biako ho nsɛm a ɛkɔ akyiri. Wɔ vinyl a wɔatwa mu no, ɛsɛ sɛ beae biara a wɔakora so no yɛ honam fam ade a ebetumi atra ase bere a wɔatwitwa, atutu, de akɔ baabi foforo, na wɔde adi dwuma.

Bisa nsɛm yi bere a woresan asusuw asɛm no ho no:

• so saa nsɛm yi sõ araa ma ɛbɛkɔ so abata ho?
• so ehia se wode nsa yi nwura yi?
• so supɔw bi benya bea a emu da hɔ wɔ bere a wɔde rekɔ baabi foforo no?
• so nsɛntitiriw dodow bi a ɛbɛn no betumi ama so?
• so silhouette no da so ara kenkan se texture nketewa yera a?

Eyi nti na ebia ɛho behia sɛ wɔma atade a wɔde nhwi ayɛ, afifide a nhaban wɔ so, anaa atade a wɔde ahama ayɛ no yɛ mmerɛw sen kuruwa, dade kyɛw, anaa ade a ɛte sɛ ahyɛnsode a ɛyɛ den no.

Yɛ raster mfiase a ɛho tew

Fi ase fa fibea a ɛwɔ nsusuwii a ɛkorɔn sen biara, a ɛyɛ nnam sen biara a wowɔ no so. Yi akyi no, afei hwɛ contour no mu hwɛ sɛnea hann ne sum a wɔadi kan ahwɛ no.

Fa refinement siesie mfomso ankasa:

• san de ntwea anaa nsa bi a ayera ba
• yi akyi patch bi
• to pinhole a ɛtwetwe adwene mu
• tew atoro a woapue ho

Mfa dɔnhwerew biako nkora ti nhwi biara so sɛ vinyl nsusuwii a etwa to no bɛyɛ torotoro a. Mmom no, fa w’ani si nsεmfua a εka asɛm no ho asɛm pefee.

Sie PNG a ɛda adi no ansa na woayɛ no mmerɛw akɔ akyiri. Ɛda so ara yɛ nea mfaso wɔ so ma mockups, print versions, ne daakye tracing mmɔdenbɔ. Sticker ne print-ready cutouts kata transparent-master adwumayɛ nhyehyɛe no nyinaa so.

Wohyɛ da ma silhouette no nyɛ mmerɛw

Automatic tracing taa san yɛ wobble biara a ɛwɔ raster ano. Ɛno betumi ama node ɔhaha pii ne ntwitwiridii nketenkete pii aba a ɛremma adwini a wɔawie no nyɛ fɛ.

Ebia nea ɛka ho ne sɛ, nea ɛka ho ne:

1. Smoothing shallow edge dede bere a wokura ntwea so a ɛho hia.
2. Nsusuwii a ɛbɛn yiye a ɛsɛ sɛ ɛyɛ n’ade sɛ ade biako a wɔde bɛka abom.
3. Nsonsonoe ne nsensanee a atew ne ho a wobeyi afi hɔ.
4. Tokuru a ntease wom a anka ɛbɛto mu bere a wɔretwitwa no a wɔbɛma ayɛ kɛse.
5. Mfinimfini mu nsɛm a ɛnka sɛnea wohu no a wobeyi afi hɔ.

Fa adwini a wɔayɛ no mmerɛw no toto ne kɛse ankasa ho, ɛnyɛ bere a woayɛ no kɛse nkutoo Sɛ asɛmti no kɔ so hu na ɛho tew a, ɛnde na nea wɔayɛ no mmerɛw no reyɛ adwuma a mfaso wɔ so.

Si gyinae wɔ silhouette ne layered design ntam

Mpɛn pii no, kɔla biako silhouette ne ɔkwan a ɛyɛ mmerɛw sen biara sɛ wobetwitwa na wɔatwa nwura. Ɛyɛ adwuma yiye bere a akyi nsusuwii no kura ntease no.

Layered design betumi akora nneɛma te sɛ anim, panel, anaa kɔla a ɛto so abien so, nanso layer biara de alignment ne transfer adwuma ka ho. Fa layers di dwuma bere a ɛma wohu nneɛma yiye wɔ honam fam, ɛnyɛ sɛ kɔla pii wɔ mfonini a efi mu ba no mu kɛkɛ nti.

Wɔ layer biara ho no, hwɛ sɛ:

• ye nsusuie a woatoto mu, a woahyehye
• nsupɔw nketewa wɔ nhyehyɛe a wɔde besi hɔ
• overlap anaase registration no te ase
• a ewo akwan mmienu a ewo ho
• a ewo stacking order no mu da adi pefee

Wontumi mfa vinyl a ɛyɛ den biako nkyerɛ sɛnea ɛkɔ soro a ɛte sɛ mfonini. Kyerɛkyerɛ ase kɔ nsusuwii ahorow a anohyeto wom mu anaa paw ɔkwan a wobɛfa so atintim mmom.

Hwɛ minimum detail ne spacing

Amansan nyinaa mu ahobammɔ a ɛba fam koraa biara nni hɔ. Ne kɛse a wobetumi de adi dwuma no gyina afiri no, agyan, vinyl, mat, nhyɛso, ahoɔhare, sɛnea wɔayɛ, ne nea ɔde di dwuma so.

Ansa na wode wo ho bɛhyɛ batch bi mu no:

• hwehwe adee yɛfo no akwankyerɛ
• bisa operator no fa minimum line ne gap sizes a woada no adi ho
• twa nhwɛsoɔ ketewa bi wɔ ne kɛseɛ a ɛtwa toɔ no mu
• de nsɛm nketenkete a wɔahyɛ da ayɛ no ka sɔhwɛ no ho

Sɛ ɔfã teateaa bi tetew anaasɛ ɛma so bere a woretutu nwura no a, ma ɛntrɛw anaa yi fi hɔ. Ebia adwini no nyinaa a wɔbɛma ayɛ kɛse no nso adi ɔhaw no ho dwuma, nanso ɛno sesa ne kɛse a wɔawie no.

Trace, afei hwɛ vector no mu

Fa PNG a ɛda adi no kɔ softwea a wode di dwuma ma wo cutter no mu na yɛ trace, anaa san fa nsa twetwe nsusuwii no bere a pɛpɛɛpɛyɛ ho hia. Sɛ wohwehwɛ akyi wie a, fa raster mfonini no sie na hwɛ akwan no nkutoo.

Hwehwɛ:

• a wobue akwan a ehia se wode nsusuie a woato mu
• contours mmienu twa ano baako ho hyia
• a eboro so node
• nketewa loops ne akwanhyia nsupɔw
• ankasa ntwitwagyee
• jagged curves a raster dede na ɛde ba

Fa ahwɛyiye tew nodes so. Sɛ wɔma ɛyɛ mmerɛw dodo a, ebetumi ama ntwea bi a ɛda adi no ayɛ kurukuruwa anaasɛ atoto ɔkwan bi a mfaso wɔ so mu. Ɛsɛ sɛ vector no yɛ mmerɛw sen fibea no bere a ɛkora asɛmti no nipasu so.

Yɛ nhyehyɛe ma nwura a wobetutu

Nwura a ɛyɛ den no yɛ nhyehyɛe no fã, na ɛnyɛ nea wɔasusuw ho wɔ akyi. Kan emu asinasin no na fa no sɛ wubeyi afi hɔ mmiako mmiako.

Nkyerɛwee a ɛyɛ den, nkyerɛwde nketenkete, ne ntokuru a wɔtaa yɛ no betumi adan nea wɔatwa no ntɛmntɛm ayɛ no nsaanodwuma a ɛyɛ brɛoo. Sɛ adwuma no hwehwɛ sɛ wɔyɛ mfonini pii a, ma ɛnyɛ den kɛse mpo anaasɛ kyekyɛ adwini no mu yɛ no afã horow a wotumi di ho dwuma.

Sɛ wopɛ nneɛma a wɔayɛ no akyi anaasɛ ɛte sɛ stencil a, si mmeae a woyi ne nea aka so dua. Kɔla abien a wɔde hwɛ ntɛm betumi ada nsusuwii bi a wɔadan no adi ansa na wɔasɛe nneɛma.

Yɛ sɔhwɛ a ne kɛse ankasa yɛ

Ɛsɛ sɛ sɔhwɛ no de nneɛma a wɔahyɛ da ayɛ ne mfiri nhyehyɛe a ɛbɛyɛ sɛ wɔde di dwuma. Adanse kɛse bi a ɛwɔ krataa so nkyerɛ suban koro no ara a vinyl ketewaa bi a wɔatwa no te.

Bere a woreyɛ sɔhwɛ no, hwɛ sɛ:

• a ɛho tew wɔ ntwea so ne curves
• a wontwe won ho wo nsensanee teateaa so
• a wotumi di ho dwuma weeding
• a egyina pintinn transfer
• a wotumi kenkan nsɛm a ɛkɔ akyiri wɔ kwan a wotumi hwɛ so daa
• adhesion wo ananmusifo soro

Kyerɛw design version ne nhyehyɛe no a nea efi mu ba no ka ho. Sɛ wosakra ne kɛse kɛse a, sɔ hwɛ bio efisɛ minimum details scale ne no.

Nhwehwɛmu a etwa to

• [ ] Transparent raster master a wɔakora so
• [ ] Silhouette kenkan pefee wɔ ne kɛse a etwa to no mu
• [ ] Nsupɔw nketewa, slivers, ne gaps a wɔayɛ no mmerɛw
• [ ] Kɔla baako anaase layered kwan a wɔhyɛ da paw
• [ ] Vector akwan a woahwehwe mu a raster no ntumi nhunu
• [ ] Minimum detail a woahwɛ mu wɔ operator anaa adwinnadeɛ akwankyerɛ
• [ ] Weeding mmɔdenbɔ a wosusuw ho
• [ ] Nneɛma ho sɔhwɛ ankasa a wɔawie
• [ ] Correct cut version a wɔato din pefee

Sɛ wopɛ sɛ wotintim sticker sen sɛ wobɛtintim vinyl nsusuwii a ɛyɛ den a, di Die-cut sticker prep from a transparent PNG akyi. Adwumayɛ nhyehyɛe abien no kyɛ edge discipline, nanso wɔn production files ne constraints no ntumi sesa.